Select a Category
Build Author Spark Concepts Views 61188
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author RobSaunders Views 9945
Laser Cutter/Engraver OptLaser 6W with Z-axis
This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.
Build Author msdosfx Views 2563
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Build Author Spark Concepts Views 1522
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
Build Author Spark Concepts Views 5341
CNC xPRO V4
Take your build to the next level with the CNC xPRO V4!
Build Author joetemus Views 9690
K40 ACRO Conversion
A K40 to ACRO Co2 laser cutter build. Designed and built to expand the work area of the K40
Build Author Iwan Müller Views 4565
Non OX CNC Router
This CNC Router is to 95% made of standard parts and almost all of them from the http://openbuildspartstore.com/.
Build Author Rick Holder Views 9842
Gantry Type CNC with Makita Router
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
Build Author Carl Siren Views 3715
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
Build Author pedrofernandez Views 3643
The Acro Laser Machine Build
Build Author ShockingTops Views 1995
Opening into doors
Construction of a CNC table for a specific project that could cut an area larger than a door (>8'x4'). Much thought went into how to avoid the weight of the gantry bending the (long) Y axis, whilst still keeping down the complexity and cost.
Build Author Jake Fry Views 7864
Another (Mostly) Stock OX
For my first Openbuilds project, I decided to put together an OX CNC Router.
Build Author Firetruckguy Views 10417
Nebraska 1246 x 1184
This is my first attempt at a CNC anything build
Build Author Catawissa_CNC Views 4918
This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.
Build Author Richard Gouge Views 5855
C-Beam Big Mouth
My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.
Build Author John Meikrantz Views 8552
Another build based on the venerable OX. xPRO CNC controller, and a few extras.
Build Author Iwan Müller Views 14636
CNC Router (Non OX)
My own Design (not an OX Derivative) using standard Parts.
Build Author dcarlisle Views 8534
pain in my ox
build is in process the machine went together perfectly no issues at all but the software is another issue I have been trying to get the thing dialed in it is driving me nuts I'm still in the process will update if I ever get it figured out
Build Author Nickies Views 3000
This will be an OX based machine which I've designed to make the best use of my materials, be as precise as the design allows and operate as quietly as possible. I live in an apartment complex so space and noise are two important factors for me. Therefore the machine needs to do as much as possible while using little space and not annoy the neighbours.