Select a Category
Build Author pedrofernandez Views 4677
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
Build Author Mark Carew Views 275
High Z Mod for Lead CNC
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
Build Author petethepig Views 2469
OpenBuilds ACRO Z Axis
Z-Axis for OpenBuilds ACRO system. It is sturdy enough to carry a small drill.
Build Author mjenkins5720 Views 258
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author alan richard Views 29648
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Build Author Mark Carew Views 74372
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author Michael.M Views 10735
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
Build Author Roy Berntsen Views 4270
V-Baby CoreXY - Quality Engineered DIY 3d Printer
Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers
Build Author openhardwarecoza Views 56617
openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)
DIY Lasercutter: Budget orientated, medium sized (60-100w), safety first, based on Lasersaur software toolchain
Build Author Mark Carew Views 12016
OpenBuilds Sphinx 55
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
Build Author Mark Carew Views 9107
OpenBuilds WorkBee 1050
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 11537
OpenBuilds Sphinx 1050
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
Build Author Mark Carew Views 24315
OpenBuilds WorkBee 1010
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 27388
OpenBuilds WorkBee 1510
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
Build Author taratata2016 Views 4169
Panther 3D printer
After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3
Build Author pedrofernandez Views 391
Openbuilds CubeBot 3D Printer
Cartesian type 3d printer build
Build Author viktop Views 7713
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
An OX-inspired mini desktop mill.
Build Author Mark Carew Views 42013
V-Slot™ Nema 23 Linear Actuator Build (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author Lasersc Views 1292
The D & R TigerPaw Trilogy
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
Build Author Keith Davis Views 486
A 200mm x 300mm x 200mm workhorse that never needs leveling due to Posi-Drive Leveling design.
Build Author Mark Carew Views 892580
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Mark Carew Views 83273
C-Beam™ Linear Actuator Build
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author roadss Views 13940
Rawcnc 1.5 Desktop Edition
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
Build Author DakotaBusy Views 1642
OX (Large) CNC
Building a Large OX CNC Open Build on a fold down table.
Build Author Chris Anderson Views 30886
Openbuilds Co2 80w Laser Cutter
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Build Author Kyo Views 99739
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author Mark Carew Views 12640
V-Slot Modular Sit/Stand Desk
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
Build Author Mark Carew Views 104209
OpenBuilds ACRO System
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
Build Author viktop Views 3921
Simple Cnc System (arduino Grbl)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
Build Author Mark Carew Views 57261
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
Build Author Cortellini Views 2318
the Feedback Fractal project
The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.
Build Author obmilllivebuild Views 3563
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
Build Author jdeglavina Views 3019
SMD Pick and place machine - Smoothieboard/OpenPnp
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
Build Author JerwanDavis Views 2325
Coined by my family as the: Davomatic
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Build Author Bikes and Beer Views 1584
The Forever Project
Workbee 1010 Lead Screw with water cooled spindle and enclosure
Build Author superwoodle Views 1840
A table top OpenBuilds MiniMill build. 48V 52mm spindle with ER11 collets.
Build Author Sonny Lowe Views 9523
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author Daid Views 1700
Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.
Build Author Mark Carew Views 1694
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author Shelby Teknologies Views 681
Pick and place
Pick and place based on the Openbuilds ACRO 20x20
Build Author Mark Carew Views 184672
C-Beam® Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author dreys Views 4869
Behemoth cnc router with linear rails
Behemoth cnc router build in progress using hiwil rails and closedloop servos.
Build Author Dexter Oddwick Views 5462
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Ryan Lock Views 99044
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Christian James Views 2185
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Build Author evilc66 Views 14633
My C-Beam 3D Printer
Larger format FDM printer using C-Beam linear stages
Build Author Mark Carew Views 5427
C-Beam XL Nema 23 Actuator
This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community
Build Author David Hartkop Views 802
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Greg Wroblewski Views 4903
Acro Pick And Place Machine
This is a machine for placing SMT components on PCBs. It is based on Acro system, off the shelf parts, and a number of custom 3D printed elements.
Build Author Lumberjack Engineering Views 11946
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Build Author Eric Jacobsson Views 3840
The Floating Dust Shoe
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Build Author Kyo Views 2784
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
Build Author Doychell Views 1699
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Build Author Sonny Lowe Views 3857
MakerSL MSL-21 OB Minimill Enclosure
Simple enclosure for the OB Minimill
Build Author Shelby Teknologies Views 1527
Pick and place
Openbuilds Pick and Place using ideas from OpenPNP Frame work is from the Openbuilds Part store using 1000mm C beams and vslot 40x40 for support Surface is 3/4 " Particle board
Build Author Sonny Lowe Views 19753
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author ChrisViral Views 2206
OP C-Beam Machine XL by ChrisViral
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Build Author The Dude Views 7362
Flexible Axis Revolving Tool-holder
Drag knife and pen holder which mounts in spindle collet.
Build Author deltajegga Views 1903
probably as big as you'd want it...
Build Author Kevr102 Views 2291
Ooznest Ox CNC 1000 x 750
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
Build Author signzonepr Views 8029
HD c Beam CNC Router
24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!
Build Author openhardwarecoza Views 28419
Plasma cutter - 608 on steel tube version
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
Build Author Mark Carew Views 2543
C-Beam Double Wide Gantry Actuator
This easy to build actuator is configured to have not only strength, but accuracy! This low profile option offers endless possibilities, and we cant wait to see how this actuator is implemented in your build ideas!
Build Author mytechno3d Views 1860
Z FLoating head for Plasma cutting (OX CNC compatible)
How to convert your OX CNC to a plasma cutter at low cost
Build Author BNMaker Views 3824
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
Build Author Robert Hummel Views 131091
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
Build Author blterry1 Views 7757
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author beardyblair Views 18930
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author Carl Siren Views 3397
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
Build Author joe williams Views 1297
HandCrafted WorkBee - HCWB
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
Build Author pedrofernandez Views 7615
Another Sphinx 7550 Made by an Openbuilds Cbeam
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
Build Author Indieflow Views 77095
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Build Author Sword66 Views 5176
The Archon R2
The Archon "In the style of Cartesian movement." A brief overview, guide and summary of my highly experimental build. and some insight into the challenges of building such a large format/belted machine.
Build Author Michael.M Views 25819
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
Build Author Mark Carew Views 58591
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Beam Views 5044
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author polemidis Views 2916
Plasma CNC, 4'6" × 8'8" v0318
A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.
Build Author Gary Monroe Views 5764
C-Beam Desktop On Rails
My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.
Build Author Michael Rude Views 862
C-Beam Machine XL
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.
Build Author Janis93 Views 8127
1000x1000 Two version of router Belt and Screw
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Build Author Calotype Views 1367
My DIY panoramic rolling (&banding) Machine.
DO WHAT YOU IMAGINE !
Build Author obmilllivebuild Views 2961
Live C-Beam Build @ MRRF2018
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
Build Author OffAxis Views 2947
OffAxis CNC 1000x1500
Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.
Build Author semperfikurt Views 16463
Beefed-up and customized OX build
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
Build Author spark2 Views 1421
C-Beam - Sphinx 1000x1000mm inspired by Kyo
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
Build Author Cheeze Views 975
32 Button Hand Pendant for the PlanetCNC Control Board
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
Build Author James Archer Views 8019
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author Sam Price Views 2107
Acros with customizations [WIP]
This is a work in progress ACROS build with new legs and wire tracks.
Build Author Bud Griffin Views 6743
BF3D OX (Big Freakin' 3D OX)
This is my latest printer build. The second printer I've built using V-Slot.
Build Author CandlerCustoms Views 1705
Candler Customs - Custom CNC Machine
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
Build Author RJ_Make Views 1494
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
Build Author Ronald van Arkel Views 12191
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author JWhitten Views 9403
Build #2 - Bigger & Stronger
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
Build Author blue25 Views 2205
Need cnc to make alumunium sign, brass stamp, etc
Build Author ZacharyB Views 1823
Arizona OpenBuilds MiniMill CNC
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
Build Author CNCMD Views 2671
Sphinx 1000 x 500
Building a Sphinx based CNC based on Kyo's plans. Going with a 1000 x 500 table size.
Build Author Adam Filipowicz Views 5182
CNC Based on CBeam, with No custom Plates, and Z GANTRY
Build Author Kyo Views 3989
Plate Maker V-slot Table
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
Build Author Peter Van Der Walt Views 1718
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining