Select a Category
Build Author TRMA-Chaser Views 1140
Cnc Mill using standard and 3d printed cimponents
I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.
Build Author Joe Young Views 4965
Rack and Pinion (Death to Belts)
Low profile rack and pinion linear actuator design
Build Author John J Talavera Views 14359
CNC FOR EVERYONE!
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
Build Author Sonny Lowe Views 19842
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author James Evanko Views 1141
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author BeTrue3D Views 13661
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Build Author Fabio Orsi Views 3682
147 RepStrap 002
This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.
Build Author 3D Meister Views 2311
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Ronald van Arkel Views 28394
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author MTO Views 7758
Making a bellows to cover a C-beam to prevent swarf from gumming up the works.
Build Author Metalguru Views 7615
Small Laser Engraver Concept
Low cost Laser Engraver build using all off-the-shelf components.
Build Author Sonny Lowe Views 11294
MakerSL MSL-6 DLP 3D Printer
This will be a DLP 3D Printer designed around an Openbuilds Frame and rail system. It will be a collaborated effort between myself and Ben Smith. We will be building two prototypes.