Select a Category
Build Author David Florian Views 853
Dual Extruders 3D Printer - Zidex Upgraded
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
Build Author crypt-tek Views 20019
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Build Author Robert E. Nee Views 9478
Large cartesian gantry style 3D printer
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
Build Author BinaryConstruct Views 5414
This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.
Build Author h3rb Views 2062
TEVO Little Monster Direct Mount Extruder
Cheap, experimental Modification to Tevo Little Monster's bowden system for the extruder
Build Author stephen cia Views 14850
3D printer with 7 drivers, compact, dual extruder, no CNC part. All Openbuilds and 3D printed part. This is purely experimental.
Build Author mirage335 Views 4831
Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.
Build Author J-Wahl Dezign Views 6560
1.4 meter tall build height, 300x410mm build plate cartesian
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
Build Author Tom Dirriwachter Views 3181
3DS Cube 3 Modular Extruder
How to modularize the 3D Systems Cube 3 extruder nozzle.
Build Author Dmknerr Views 2705
Server Rack Printer
My first project build. Concept build to use an existing 7.5 ft tall server rack as the frame. This ptoject may never be completed.
Build Author dodgenet Views 3913
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author dddman Views 11329
Prusa i3 (Acrylic frame with OB rods)
The Prusa i3 (iteration 3) is the newest and most current 3D Printer design by RepRap Core Developer Prusajr (source: http://reprap.org/wiki/Prusa_i3)
Build Author Sheepdog Views 22040
Griffin Delta Printer
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.
Build Author John J Talavera Views 6254
CNC FOR EVERYONE, THE DUCK!
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Build Author Cbrown330 Views 3354
Big 3d Printer, Big Brown
This is a big 609 x 609 x 914 3d pritner with exchangable hot ends and extruders.
Build Author Cuong Vu Views 23806
It took me 18 long nights to build it
Build Author Fabio Bertuzz Views 2698
Fascinated for some time by 3D Printing. Now, after studying countless forum posts, blogs and similiar stuff, i want to Start with my own build. Maybe a bit much but usually i thrive with the challenge.
Build Author Ulnad Views 12410
Delta Bot: Improved DIY 3D Printer
Build the efficient and reliable all metal structure 3D Printer. Improved significantly with new concepts for printers. Great quality and up to 400 mm/s print speed (very fast). Built with heated bed, hybrid bowden suspended extruder, and counterweight (tested printing 21 hours straight with no motors hot). Optional smart controller for computerless printing. Print any kind of thermoplastic.
Build Author UltiBots Views 25722
Mini Kossel V-Slot 3D Printer
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Build Author MechEng Views 12558
Generic Rigid 3D Printer (Currently on 1st Revision!)
Rigid 3d printer with more than enough room for dual extruders. Easily expandable platform.