Select a Category
Build Author SORIN ILIESCU Views 2469
Sphinx 55 on MGN12 linear rails
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
Build Author j0achim Views 6758
CoreXY - e3d inspired
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
Build Author Jacob Lotter Views 5729
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author crypt-tek Views 3819
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
Build Author Todd Brous Views 846
Modified Acro with build plate, Z-axis and OPT Laser
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.
Build Author DazTheGas Views 21428
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
Build Author Gerald Klein Views 5648
300mm Diameter, 1 Meter tall, Delta 3d Printer
I built a custom delta using 3, 1000 mm long C-Beam® Linear Rails and 3 C-Beam Gantry Sets. I had the bottom and top plates water jetted ( for accuracy ) out of 1/2 inch aluminum, from a design that I did in Fusion 360.
Build Author Doychell Views 1708
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Build Author crypt-tek Views 17930
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
Build Author Kyo Views 3682
C-beam Delta Printer
Large scale delta robot using c-beam as the core frame component.
Build Author blterry1 Views 7786
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author Bucky Wootmaster Views 1211
CNC machine using extrusions with linear rails and ball screws on all axes - no plates
Build Author Chetan PM Views 1386
Gantry style rigid build
Build Author CandlerCustoms Views 1720
Candler Customs - Custom CNC Machine
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
Build Author Jay Lytle Views 1705
Stock CNC Router
This is my first CNC router, so be kind on the criticism. I'm still learning. Not an engineer, and not a machinist so I am having to research and learn aspect from both of those areas of study!
Build Author Goran crno Views 5276
New Custom CNC with C-Beam Rails
Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.
Build Author Steve hope Views 14052
8x4 CNC build
Routy cnc upgrade.