Select a Category
Build Author Mark Carew Views 24543
OpenBuilds WorkBee 1010
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 9163
OpenBuilds WorkBee 1050
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 27547
OpenBuilds WorkBee 1510
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
Build Author MattR Views 4620
Fixed Gantry CNC Router with Old Industrial Supplies
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
Build Author recoush Views 3644
CoreXY 3D build one
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
Build Author Mark Carew Views 12090
OpenBuilds Sphinx 55
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
Build Author Mark Carew Views 11604
OpenBuilds Sphinx 1050
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
Build Author roadss Views 13998
Rawcnc 1.5 Desktop Edition
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
Build Author JerwanDavis Views 2333
Coined by my family as the: Davomatic
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Build Author Santoferr Views 3720
Butterfly 3DP V 1.0
tronxy x3 like
Build Author Mark Carew Views 184817
C-Beam® Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author Lumberjack Engineering Views 11962
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Build Author SCYBUCK Views 2501
KYO SPHINX a la' SCYBUCK
KYO SPHINX, CENTROID ACORN, GECKO 540, HALL EFFECT LIMIT SWITCHES, 2.2 KW, 24,000 RPM SPINDLE, WATER COOLED, 600 oz-in STEPPERS, INTENDED TO CUT ALUMINUM.
Build Author HuguesP Views 5266
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
Build Author pedrofernandez Views 7625
Another Sphinx 7550 Made by an Openbuilds Cbeam
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
Build Author Michael.M Views 25847
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
Build Author bassgojoe Views 2353
Joe's Minimill Build
I put this together to cut aluminum. Chips get everywhere! Cover your lead screws. Put the mill inside an enclosure. DON'T mount electronics (especially the power supply) inside the enclosure, chips will get into it and short it out. Remove the manual jog wheels, they contribute to chatter (something about having a mass on the end of the lead screw causes vibration). I cut at 14000 RPM, 0.05 inch width of cut, 0.05 inch depth of cut, 30 inches per minute and just barely avoid chatter.
Build Author jtaggard Views 13723
Modular DIY CNC Machine
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
Build Author jamesdjadams Views 8542
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
C-Beam XL build using TinyG V8.
Build Author Kyo Views 3997
Plate Maker V-slot Table
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
Build Author HenryCNC Views 5187
Desktop CNC machine
Stable solid, hope can cooperate with coolant in the future.
Build Author Jason Harding Views 1987
Mobile bed cnc machine, first build
Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.
Build Author Sonny Lowe Views 4205
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Build Author Tazilla Views 7368
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
Build Author chenderson Views 7178
CRH C-BEAM Router, steel capable
C-beam based CNC router using mostly openbuilds parts.
Build Author getoffmyland Views 9372
Water Buffalo - Water jet cut OX+
A modified OX based on Aluminum plates cut on a waterjet. Some new ideas and additions from other builds are included.
Build Author openhardwarecoza Views 23381
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
Build Author Metalguru Views 4208
C-Beam XL with Aluminum Bed
C-Beam XL with v-slot aluminum bed for fixturing.
Build Author Edgar Robles Views 2228
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
Build Author Matt Nelson Views 8802
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
Build Author andrizzle Views 4056
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
Build Author Raed Al Nuaimi Views 4951
Aluminium Router From Dubai
Another modification on the OX
Build Author Donald D. Parker Views 3712
BABE - CanUSA Blue OX, bigger than the average OX
This is a basic description of my OX-like build of Babe, Paul Bunyan's Blue Ox. It is a work in progress. The idea has been germinating for about 4 years, with several twists and turns and false starts along the way.