Select a Category
Build Author Kanu Views 22
Filament winder ( carbon fiber )
Carbon fiber filament winder
Build Author sausagePaws Views 1686145
DIY Embroidery Machine V2
My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.
Build Author Mark Carew Views 13152
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
Build Author MattR Views 2474
Cricut Expressions 2 to ESP32 GRBL Control
A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.
Build Author mytechno3d Views 9499
Cut To Length Machine
A Cut To Length machine controlled by computer
Build Author rkugler Views 2119
Miter Saw Stop Block
Just starting a miter saw stop system. Any suggestions appreciated.
Build Author mjenkins5720 Views 271
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author Mark and Oreo Views 405
Cnc od grinder and thread grinder
This is a totally original build of an od id grinder and thread grinder, I hope.
Build Author Cortellini Views 1345
The FEEDBACK FRACTAL Build
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
Build Author Sir Bagels Views 316
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
Build Author rcKeith Views 433
USB Hot Wire CNC Foam Cutter
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
Build Author Mark Carew Views 12651
V-Slot Modular Sit/Stand Desk
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
Build Author Spark Concepts Views 60178
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author Mac6986 Views 4003
Vinyl Application Roller table
Build progress of custom roller table for applying graphics
Build Author Michael Guerra Views 270
Taller couch legs
A simple but elegent couch legs
Build Author ANDERS NORLINDER Views 856
Cnc mill, Plasma cutting and weld table
A functional table for plasma cutting, welding, tooling........
Build Author Rusticalmond Views 7952
CNC Hot Wire Cutter 4 Axis for Cutting Foam Wings
My build is to allow me to cut foam wings using CNC Hot Wire Cutter.
Build Author Spark Concepts Views 1285
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
Build Author Spark Concepts Views 4755
CNC xPRO V4
Take your build to the next level with the CNC xPRO V4!
Build Author jdeglavina Views 3045
SMD Pick and place machine - Smoothieboard/OpenPnp
A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp.
Build Author Ariel Yahni Views 1860
OB 2x72 Belt Grinder
Build a 2x72 Belt Grinder out of OpenBuilds V-Slots
Build Author HuguesP Views 798
Peristaltic pumps, Automatic Cocktail mixer
This is an automatic cocktail mixer made with 8 small peristaltic pumps. this is driven with the touch screen or over wifi. the controller used is a raspberry pi with a Apache webserver
Build Author Chazg Views 816
Indoor Drumline Props
Build Author Sonny Lowe Views 9542
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author Cosmosteel Views 1077
Clear Acrylic Dust Shoe
Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.
Build Author Hidro669 Views 565
My custom world of tanks gaming desk built by Ragged Edge Eaming Solutions
summary huh... If it doesnt fit MAKE IT!
Build Author Mark Carew Views 1699
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author Gino Lanzi Views 5750
2 GANTRY CNC HOTWIRE MACHINE
A 2 independent gantry affordable hotwire machine.
Build Author Shelby Teknologies Views 685
Pick and place
Pick and place based on the Openbuilds ACRO 20x20
Build Author Vegard Humlen Views 1483
CNC Coating Machine
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
Build Author Joe Young Views 1947
Goliath - CNC + 3D printer Hybrid
Mostly for Mill work, and FDM 3D printing (mostly Nylonx). I'm currently in the process of adding some hardware for a project requiring lathe work. I've included a solidworks 2014 pack and go for those of you interested in the build. if you need another file type, just let me know and i can try to accommodate. This is a scratch build (electronics and hardware)... see photos. Everything is pretty close to industrial quality... Electronics too. I got sick of other COTS designs breaking down
Build Author Jacob Lotter Views 1181
CNC ESS Controls System
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
Build Author David Hartkop Views 807
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Greg Wroblewski Views 4925
Acro Pick And Place Machine
This is a machine for placing SMT components on PCBs. It is based on Acro system, off the shelf parts, and a number of custom 3D printed elements.
Build Author Savvas Views 10254
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Build Author Eric Jacobsson Views 3854
The Floating Dust Shoe
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
Build Author Mark Carew Views 2126
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
Build Author Greenman Views 644
Gluing frame for guitar tops and backs
I have built four of these frames. The first pictured I have been using for maybe a year or two and bought the clamps. The last three I have made I have built my own clamps with openbuild parts. I am still working on the design. At present I use wedges to apply pressure to the side of the wood and block. I am working on a cam system to apply pressure. I just bought 8mm screws with Knobs for quicker adjustment. I will update the build when I make these improvements.
Build Author Shelby Teknologies Views 1539
Pick and place
Openbuilds Pick and Place using ideas from OpenPNP Frame work is from the Openbuilds Part store using 1000mm C beams and vslot 40x40 for support Surface is 3/4 " Particle board
Build Author Kedals Views 539
Small Slot Cutter
A build to cut .008 inch slots into JB Weld.
Build Author blindflight Views 364
Open Builds C-Beam K-cup holder
Making use of c-beam I have had left over from projects.
Build Author James Evanko Views 1129
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author The Dude Views 7370
Flexible Axis Revolving Tool-holder
Drag knife and pen holder which mounts in spindle collet.
Build Author Joonie65 Views 2065
Hydraulic lifting table
I started this project without drawing. in itself this went fine with some minor adjustments. My profession is machine builder that might make it a little easier. I still enjoy it every day.
Build Author MTO Views 957
DIN 35mm -like quick clip for 20mm extrusion
A half baked idea for mounting electrics and electronics using a 35mm-DIN-rail-like mounting.
Build Author hbtousa Views 396
Stinger-Panting Images in the Air
Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.
Build Author MTO Views 451
3d printable galvos
Build Author stepper Views 894
Touch screen macro imaging
This is a brief overview of the build of my macro imaging slide.
Build Author Makerparts Views 1231
Makerparts Mpro Slider System
Makerparts.ca MPro Camera Slider System
Build Author mytechno3d Views 984
Crypto Mining rigs with vslot rail
Build Author Mark Carew Views 58655
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Beam Views 5055
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author MTO Views 2683
V-Slot MAME cabinet
A minimalist MAME "cabinet" made from extrusion.
Build Author Robert Hummel Views 13063
DIY anodizing power supply
How to make your own anodizing power supply on a budget
Build Author Jason Crayne Views 1705
glue/staple/eject 1 Axis driven Rail building machine.
Build Author Tommy Williamson Views 2295
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
Build Author Calotype Views 1373
My DIY panoramic rolling (&banding) Machine.
DO WHAT YOU IMAGINE !
Build Author sausagePaws Views 50460
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
Build Author Naomi Wu Views 4612
Naomi Wu's Automatic Bartender- BarBot!
This is an automatic bartender- a BarBot, designed to be made with off-the-shelf OpenBuilds, V-slot and low-cost 3D printer parts.
Build Author uGen Views 12311
Lab Power Supply + Soldering Station
A small 32 V, 96 W lab power supply with voltage/current/power limit, program memory and an outlet to power the popular TS-100 soldering iron
Build Author hbtousa Views 783
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
Build Author north90 Views 9423
OpenSampler: OpenSource autosampler for use in laboratory
An open source autosampler to be used in laboratories for the automated analysis of gas or liquid samples.
Build Author Cheeze Views 979
32 Button Hand Pendant for the PlanetCNC Control Board
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
Build Author Rodrigo Gonzalez Views 1208
The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.
Build Author JimB828 Views 3134
Miter Saw Station
A Miter Saw station built using a Dewalt Miter Saw Stand and V-Slot extrusions.
Build Author RJ_Make Views 1500
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
Build Author TWBoy Views 1188
This box is made from tough aluminum with plastic boards, helps hold WiFi Routers, Modems, or/ Ethernet Switches! The aluminum can resist the heat produced by these electronics, and the weight of the electronics, also being light itself. This box is the thing you need to hold your electronic devices!
Build Author Jens Grabner Views 2121
This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.
Build Author MTO Views 1593
Absolute positioning hardware and software
Absolute linear positioning using deBruijn sequences.
Build Author crispin Views 580
Hi my name is crispin and I'm an aluminum addict.
Build Author Mark Carew Views 22887
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Build Author Peter Van Der Walt Views 1726
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
Build Author rcKeith Views 34847
Hot Wire 4 Axis CNC Foam cutter
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Build Author Mario A. Arevalo Views 920
Screen Mesh Stretching
The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.
Build Author pek Views 2268
V-Slot Hand Cutting Jig
To help cutting v-slots with hand saw
Build Author Don Crawford Views 5394
Table Saw Fence
Trying to build a low cost table saw fence using v-wheels
Build Author Peter Van Der Walt Views 2936
The Almost Perfect 3 Way Mitre (with MakerLinks)
A quick and easy way to make a 3-way mitered corner using MakerLinks
Build Author Anthony Castelluci Views 1080
Simple Camera Lofted Camera Slider
Build a manual camera slider.
Build Author Rick 2.0 Views 3788
Adjustable Router Guide Template
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
Build Author mcbuilder22 Views 1640
Automatic spray machine.
Build Author Marc Gingras Views 4902
Table saw fence and guide
The idea was to build a proof of concept table saw fence similar to a thru-rip or accusquare fences which retail for 400$, with the added option to motorize the positioning.
Build Author gjwest Views 27482
Time Lapse Camera Rail
This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.
Build Author PhotoSgt85 Views 1872
Modular Controller PCBs
This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.
Build Author Venturebit Views 4021
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Build Author Jinx117 Views 3685
V-Slot Linear Actuator Bundle
v-slot linear actuator build.
Build Author Jonathon Duerig Views 3933
Chrysalis: An Enclosure for TAZ 6 3d Printers
Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.
Build Author Peter Van Der Walt Views 3557
The Almost Perfect 3 Way Mitre (with Angle Corner Connectors)
A quick and easy way to make a 3-way mitered corner using Corner Connectors
Build Author MTO Views 2202
C-beam upgrades to my power tools
Just some repairs and upgrades to my drill press and mitre saw using c-beam.
Build Author 3D Meister Views 2308
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Robert Huxford Views 1821
High Intensity Dive Light
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
Build Author Jan Koeppen Views 5363
Touchsensor assembly machine
This is a handy machine to assemble touch sensors into display frame.
Build Author Anthony Bolgar Views 5170
Spindle cooling setup
Cooling system for water cooled spindle.
Build Author Anthony Bolgar Views 2923
Air assist/fume collector for Diode Laser Engraver
This is a work in progress
Build Author Makerparts Views 4030
DIY Multi Row Nodal Point Spherical Panorama Head
DIY Pano Head
Build Author Mike Hake Views 1777
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Build Author seedorff Views 1869
A simple made hideaway for ugly electronics
Build Author Anthony Bolgar Views 1428
Clock repair stand
Open source clock movement stand
Build Author Linkreincarnate Views 1628
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Build Author MTO Views 7749
Making a bellows to cover a C-beam to prevent swarf from gumming up the works.