Build Author Mark Carew Views 446
High Z Mod for Lead CNC
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
Build Author SORIN ILIESCU Views 2215
Sphinx 55 on MGN12 linear rails
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
Build Author Mark Carew Views 893332
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author C-CNC Views 2522
Gantry Style CNC from plywood
I am currently 15 years old, from Germany and trying to build a low budged CNC router. I only designed this CNC based on other CNC routers that I have seen and what I am able of. It consists mostly of 2.3cm plywood to keep costs down. The size of the work area is approx. 40 x 80 cm. I would be really glad if you could give me advice's for improvement on the design and everything else ... ( I could really need your help :) ) enjoy :)
Build Author pauna Views 3454
My giant "WORKBEE" 1750mm X 1750mm by ooznest
CNC MACHINE WORKBEE'S table making
Build Author Craig Hollabaugh Views 1050
Hyatt and My Journey to Tonehenge
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
Build Author Glenn Weston Views 1138
"Stung by the Bee" OB Workbee 1010 Build
This will be a build Log for my Open Builds Workbee 1010 Build. I will keep a full descriptive log of the build and make any notes in the hope that it will help other builders that decide they would like to build this machine.
Build Author David Bourne Views 4271
INDY-TR12 CNC (12mm Diameter Lead Screws)
TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.
Build Author Michael.M Views 10849
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
Build Author reef Views 2565
CNC Cyclone PCB Factory, my way, step by step.
I'd like to renew my cnc for PCB so I decide to create new one from an existing project named Cyclone PCB Factory.
Build Author Ryan Lock Views 50207
WorkBee CNC Machine
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
Build Author Jacob Lotter Views 5657
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author Lasersc Views 6749
D&R Tiger Paw build combo
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
Build Author viktop Views 7747
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
An OX-inspired mini desktop mill.
Build Author SecretSpy711 Views 9303
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
Build Author OberSchutze Views 2196
A More Rigid C-Beam
I added the steel to create a less flexible milling surface to make heavier cuts in aluminum. I can also do light steel cutting now as well. I wish OpenBuilds made a steel and rail version of these kits.
Build Author T4Concepts Views 28371
WorkBee CNC build - My honest opinion, tips and help
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
Build Author HC.Carbo Views 4530
C_Beam X5L Hybrid_Tank
classic router with a ab table
Build Author roadss Views 13998
Rawcnc 1.5 Desktop Edition
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
Build Author idegraaf Views 1471
Simple cnc with 5mm steel plates.
Build Author arcrunner Views 4377
Workbee 1015 (50" wide by 30")
A Workbee able to cut 48"x24" material, built to continuously feed material so one can cut full sheets of ply.
Build Author Fábio Pires Views 1956
Frezar - Desktop CNC
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
Build Author msdosfx Views 2168
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Build Author Anthony Bolgar Views 467
CBeam Sphinx Upgrade
Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.
Build Author Kyo Views 99859
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author sharmstr Views 5402
Shawn's Workbee 1510
Shawn's adventure in assembling and customizing the Openbuild's version of the 1500x1000 Workbee.
Build Author Kazeki Views 1549
Upgrading my CNC router to run on ball screws. Me and the belts where not getting along.
Build Author KronBjorn Views 1275
WorkBee Lead 1010, Reduced Footprint, Nema17
This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.
Build Author RobFromLDMS Views 1804
Lithgow Mens Shed CNC build
The tale of how we put together our CNC Router, and some of the difficulties encountered. It is now ready for final testing and commissioning.
Build Author RV6APilot Views 1575
South Carolina Workbee 1000X1000
This is about my build of a Workbee 1000X1000 being built here in Trenton, SC. My goal is to use it to help cut the new panel for my RV6A airplane.
Build Author CNCMD Views 8188
Heavy Duty build with 1605 Ballscrew and Linear Rail
Build Author Stan Howe Views 783
Bee the Boss
The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.
Build Author Xxztrexxx Views 1565
Black out Edition Workbee 1010
Thanks to all the Open Build elves that meticulously package and wrap all the little tiny parts and pieces. I have put in a request to get you people a raise..
Build Author MarkM_NJ Views 13100
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
Build Author DazTheGas Views 21407
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
Build Author Cortellini Views 2334
the Feedback Fractal project
The Story of the Scecina Memorial High School 1510 BUILD will unfold through a series of 10 minute Episodes. Each episode will consist of video showing how to assemble some aspect of the 1510 overlaid with a discussion about Technology, Art, Philosophy... and Life the Universe and Everything. Episode two is soon to follow. If sufficient interest ensues, the episodes may continue beyond the building of the 1510 to relate its use in the making of the Art.
Build Author Sebastian-Schuetz Views 8727
Open source large format CNC-machine and 3D printer
For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.
Build Author Colin Mccourt Views 2394
The BEE and ME
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
Build Author Michael Morlan Views 1808
Shapeoko 2 - my first CNC
This was my first foray into CNC. I chose to go with a reliable kit build since my knowledge of GCode, controllers, and steppers was pretty rudimentary.
Build Author David Bunch Views 5699
Sphinx 55 with 3D Printed Addons
This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.
Build Author Knut Bøje Views 5720
My OX cnc upgrade.
Build Author Srđan Marković Views 1274
I am satisfied with my build and next one will be even better.
Build Author Bikes and Beer Views 1590
The Forever Project
Workbee 1010 Lead Screw with water cooled spindle and enclosure
Build Author superwoodle Views 1855
A table top OpenBuilds MiniMill build. 48V 52mm spindle with ER11 collets.
Build Author RoosterTX Views 2186
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Build Author mohammadyzr Views 4930
Noor CNC Designed by Mohammad Yazdi Rad www.yazdirad.com
Build Author Scott Martinez Views 4077
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
Build Author Daid Views 1706
Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.
Build Author CharlieShimota Views 9992
Vox Solid State
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
Build Author Natesbox Views 2012
OpenBuilds LEAD Machine 1010 40" x 40"
Openbuilds LEAD machine 1010 build
Build Author Dexter Oddwick Views 5472
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Ryan Lock Views 99116
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Zach S Views 9903
Ballmasters 1605 1500x1000 ox cnc
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
Build Author TurfnSurf Views 2277
DIY C-Beam CNC
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
Build Author Martin.Barfoed Views 74032
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author joetemus Views 1904
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author Jay Almers Views 1985
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
Build Author H@wk Views 2313
Sphinx CNC modified to 750mm x 750mm c-beams. Parts not readily available in South Africa, so i have to make some modifications...
Build Author Adam Filipowicz Views 2511
RRP - Roller Rack Pinion System
Current progress uses existing openbuilds bearings, but also uses 8mm shafts (custom)
Build Author mikework Views 4417
Brokkr CNC 2.0
1M C-beam xy variant
Build Author Kyo Views 2795
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
Build Author Vin1027 Views 1743
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
Build Author Anthony Bolgar Views 2161
Openbuilds 1050 Sphinx. Thank you to Mark Carew for trading me a set of plates for a spindle and PSU I was not using. Mark is a champ!
Build Author Doychell Views 1701
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Build Author Sonny Lowe Views 3865
MakerSL MSL-21 OB Minimill Enclosure
Simple enclosure for the OB Minimill
Build Author dcorb Views 4890
My Shapeoko Router build
I built this as it is a small portable design.
Build Author Joe F Views 1904
Mostly Printed Cartesian CNC
This is a build that is just getting started. Not all of the parts are ordered or printed as of 5/27/2018. Hopefully in the next few weeks all parts will be printed and most parts ordered.
Build Author Scadam Views 1254
WorkBee 1510 - First CNC Build
This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.
Build Author jgreenwd Views 4405
Portable Sphinx 1050
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
Build Author JTB715 Views 1551
1000mm x 750mm C-Beam Sphinx, running on Grbl
Build Author BOlivier Views 1367
Brice's CNC Router Build
I'm building a CNC router for a long time. Here's the result on this long journee. I tried to do my best with the basic tools I have. Don't hesitate to ask if you have questions.
Build Author fctest Views 906
ECNCML (budget mashup)
This build summarizes my CNC milling and laser engraving machine conversion from a dimensional lumber frame and electrical mess to an all aluminum frame with a safe and well constructed (IMHO) control system with the resources I had available.
Build Author rob4cnc Views 1521
Rock n Roll
The Rock n Roll is built on granite, is solid as a rock, and gathers no moss. This build provides a high degree of accuracy and repeatability. Built to be strong, use redundancy, and use long lever arms to average out imperfections in the equipment. Built to go fast and light. We will use a high speed spindle, large high voltage stepper motors and small cutting heads to overwhelm the forces produced at the cutting head.
Build Author dougsnash Views 5778
Another OX CNC Router
An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.
Build Author Scotty Orr Views 4221
MMXL - A MiniMill Conversion
Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".
Build Author micky ralte Views 2238
Workbee CNC 1500
Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon
Build Author NeeqOne Views 2239
My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.
Build Author SCYBUCK Views 2501
KYO SPHINX a la' SCYBUCK
KYO SPHINX, CENTROID ACORN, GECKO 540, HALL EFFECT LIMIT SWITCHES, 2.2 KW, 24,000 RPM SPINDLE, WATER COOLED, 600 oz-in STEPPERS, INTENDED TO CUT ALUMINUM.
Build Author Michael.M Views 4887
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
Build Author MikieLikesIt Views 6209
Cousin CNC OX Router
A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.
Build Author Serge E. Views 50676
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author HuguesP Views 5266
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
Build Author Savvas Views 9464
Halloumi CNC Machine - Acetal Plates
I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.
Build Author Jones Views 1264
The Domino - 1.5m x 1m
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
Build Author KE6MTO Views 686
My Little Mashup
A mixed drive, PI Controlled machine
Build Author Andreas Bockert Views 3707
Sphinx Z-axis upgrade
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
Build Author Dantheman Views 6161
This unit is made with openbuild v-rail and c-beam. using direct drive with lead screws. Nema23 motors
Build Author Andreas Bockert Views 4593
Yet another 1x1 Sphinx
Build a 1x1 Sphinx/Sphinx XL style CNC.
Build Author Giarc Views 33389
Lead Screw Driven Ox Derivative (850x1500)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author Techvette Views 998
From plywood and linear rail to c-beam. I probably should have bought a kit.
Build Author blterry1 Views 7773
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author beardyblair Views 18942
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author Marcwolf Views 1323
C-Beam unit with 400W Spindle
Standard (If there is one) C-Beam with plnth
Build Author joe williams Views 1312
HandCrafted WorkBee - HCWB
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
Build Author pedrofernandez Views 7625
Another Sphinx 7550 Made by an Openbuilds Cbeam
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
Build Author Gary Caruso Views 19141
OX Heavy Duty Build
OX Heavy Duty, using Chrisclub plates, for 2080 X-Y and C-beam Z
Build Author Sword66 Views 5182
The Archon R2
The Archon "In the style of Cartesian movement." A brief overview, guide and summary of my highly experimental build. and some insight into the challenges of building such a large format/belted machine.
Build Author sergien Views 2167
YAPCNC (Yet Another Poor's Man CNC)
Yet Another Poor's Man CNC (YAPCNC) is my first attempt to build a CNC. The idea is for the build to be as inexpensive as posible while being usable for my goals.
Build Author Michael.M Views 25847
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
Build Author Julius Views 18133
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.